Daktronics DataTime DF-1012 Time & Temperature Display Uživatelský manuál stáhnout pdf (Strana 34)

30 DM-100 Controller

The above example is for use with a 12-hour format, the same process will be used for the 24-hour format,

and time will be entered in military time.

After setting the time you will need to set the date. If the date is already correct, enter through the date and

press <ENTER> to send the time to the display. If the date is not correct, follow the steps below.

Set Date

Use the set date menu to enter the date in the display.

Degrees F Temperature Offset

Use the Set ºF Temperature Offset menu to set the degrees Fahrenheit offset temperature. This is the value (in

degrees) that the display will automatically increment or decrement the Fahrenheit temperature value read

from the temperature sensor.

LED Screen Action

MM – Current month

DD – Current day

YY – Current year (last two digits)

Input the month (MM) using the number keys.

Press Enter to move to DD. Enter the day.

Press Enter to move to YY. Enter the appropriate year.

Note: The ashing asterisk on the LCD shows the current data being

edited.

When nished inputting today’s date, press Enter to send to the

display and continue to the next screen.

SET TODAY’S DATE

MM/DD/YY

ENTER TO SEND

LED Screen Action

°F TEMP OFFSET

ENTER TO EDIT

+00 shows the current degrees Fahrenheit temperature offset. Press

the Up and Down Arrow keys to modify the temperature offset.

Only values between -16 and +16 are allowed

Press the ENTER key to accept changes.

Press the CLEAR key to cancel changes.

°F TEMP OFFSET

+00 ↑↓

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

Žádné komentáře

Daktronics DataTime DF-1012 Time & Temperature Display Uživatelský manuál Strana 34